Improving Filterability, Combustibility & Fuel Stability

WITHOUT ADDITIVES

OUR 90-DAY MONEY BACK GUARANTEE:
If the Dieselcraft Fuel Stabilizer fails to kill or contain fuel contamination related to, Mould or Bacteria within 90 days you can return the unit for a full refund.

In addition a LIFETIME guarantee is offered on our Magnetic Fuel stabilizer.

Diesel Fuel Purification Systems
A two-stage fuel treatment system to clean and stabilize your fuel

Your permanent fuel quality solution to reduce engine problems that are fuel related.

Stage 1: The Separator
 This high-speed centrifuge separator removes 99.9% of the water and 95% of the solid contaminants in your fuel.

No filters to change and requires no maintenance.

Clean fuel will:

o Extend engine life

o Increase performance

o Save you money by reducing maintenance costs

This separator is based on surface tension principle and rotational fluid motion also known as “Cyclone Separation”

Since diesel and water have different surface tension as well as density, when a mixture of diesel and water is spread over a large area water droplets and large solids will separate from the fuel. 

Dieselcraft uses a self-cleaning stripper screen to cause the water and solids to agglomerate and the vortex finder on exiting. This vortex adds centrifugal force to the fluids motion.

The clean fuel is drawn out of the unit and into the primary fuel filter of your system. Water and contamination is drained from the bottom of the unit. This process continues as long as the engine fuel pump is operating.

 

 

Stage 2: The Stabilizer


This Strontium Ferrite "Fuel Stabilizer" will decontaminate and stabilize the diesel fuel without the use of chemical additives. PERMANENTLY!


 Stable fuel will:
 o Reduce carbon build-up on pistons.

o Extend engine life by reducing abrasives that wear out engine parts before their time.

o Kill bacteria and mould that commonly grow in diesel fuel.
 

The Stabilizer comes with a

90 day money back guarantee

 

 

Diesel fuel is naturally unstable. Its quality and chemistry are impacted by transportation & storage from refinery to user, by heat & pressure of engines, pumps & injectors, and by water & microbial contaminants.

Dieselcraft improves Fuel Quality by reducing the size & mass of fuel droplets, organic deposits on filters and sludge in tanks.

Fuel Optimization enhances combustion, extends equipment life and lowers operating costs.

Less than Optimal Fuel offers:

Optimal Fuel Quality saves fuel, lowers emissions and cleans entire fuel system

Fits inline within 30 minutes and starts working immediately.

 Lifetime warranty.

Sizes to fit all engines to 2,500 gallons per hour Flow rates.

Model 5-29-S Complete System
For engines with ¼ lines and or for systems with fuel pump flow rates of 5 TO 29 GPH.
Inlet port size ¼" NPT. Boats, generators and trucks less than 175 HP.

 Individual Components

Separator #3x8
Measures 3" dia. X 10" OA

Stabilizer #5-29ST
Measures 3.5" square by 1.5" thick
For most Class 8 trucks, farm and construction equipment.


 Model 30-200-S Complete System
For engines with ½" and 3/8" fuel lines and or for systems with fuel pump flow rates of 30 TO 200 GPH.

All engines from 175 HP to 1100 HP
Inlet port size ½" NPT
*For 3/8" NPT line a bushing will be required

Individual Components

Separator #5x12
Measures 5" dia. X 14" OA

Stabilizer #30-200ST
Measures 4" square by 1.75" thick
 

Model 200-350-S Complete System
For engines with ¾ inch fuel lines and or for systems with fuel pump flow rates of 200 TO 350 GPH..(945 TO 1323 LPH)
Inlet port size ¾ NPT
All engines from 1100 HP to 1800 HP

Individual Components

Separator #5x12
Measures 5" dia x 14: OA

Stabilizer #200-350ST
Measures 4.75" square by 2" thick

 

Model 350-500-S Complete System
For engines with 1" fuel lines and or for systems with fuel pump flow rates of 350 to 500 GPH.(1323 TO 1890 LPH)
Inlet port size 1 inch NPT.
All engines from 1800 HP to 2800 HP

Individual Components

Separator #5x16
Measures 5" dia x 18" OA

Stabilizer #350-500ST
Measures 5.5" square by 2.25 thick.

Complete systems come with mounting, assembly hardware and assembly instructions. Individual components may be purchased separately but may not include all needed fittings for a system.

Inlet and outlet are 180 degrees apart. Special applications are available upon request. Models available to 2500 GPH flow rates.

Contact us.

For heavy users it will can pay for itself within months or even weeks.

Tank cleaning machines will be on this site shortly but are available immediately.

 Go to  Online Shop

Back to homepage