Two Stage Purification Systems
For all
diesel engine applications.
Buses and
Motor Homes, Class 8 Trucks and Pick-ups, Construction and Farm Equipment, Boats
and
Generators.
Single Stage Purification Systems
The Dieselcraft Fuel Purifiers are supplied in 21 Models. The systems range form 120 GPH (450 LPH) flow to 24,000 GPH (90,720 LPH) flow.
Portable Fuel Filtration Systems
for less than 2,000 gallon fuel contamination.
12/24 Volt
180 gallons per hour capacity
for fuel storage from 2,000 gallons to 80,000 gallons.
to detect biological contamination of all fuels.
Any of the following options will clean waste and or virgin vegetable oil used motor oil or Biodiesel in the wash process.
For proper centrifuge operation the oil must be heated to 140-180 F (60-80 C).
Multiple passes will be needed depending on the degree of contamination.
In most cases "rough" filtering with a
100 mesh (140 micron) strainer is required initially. Then
3-4 turns of the volume through the centrifuge in most cases
will give optimum results and a better finished product,
To remove glycerin at the end of the process no heat is
needed. More than one pass may be needed.
Centrifuges are not a methanol recovery device.
Centrifuges can not be used to remove
lye from Biodiesel production. Water wash is required.
In all cases the centrifuge will de-water BUT on shut down
you MUST divert or catch the contents of the rotor before it
stops to prevent the water it will hold from draining back
into the now clean oil.
The use of extra rotors will speed up the process time.
Dirty rotors can be removed in two minutes and then
cleaned after they cool. The cleaning of a rotor at 180F is
difficult and will take 15-30 minutes to cool.
Measures 12” wide by 42” tall and 16” deep to stand next to
a 55 gallon drum.
Build your own engine and Vegoil Processer
We can supply a 230/115 volt Motor close coupled to a Haight Hot oil gear pump that will provide the required flow and pressure for all our centrifuges. £ 350.00 plus VAT
or get a factory built one as shown here
|
Model OPS-20
Cleaning rate: 55 gallons per hour Shipping weight: 70 pounds (32 Kg) Rotor holding capacity: 10.5 oz of contamination. Pump and Motor Features: 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts and mechanical seal. Motor is 1/3 hp USA manufactured carbonator-mount motor, 115V-60Hz-1 phase, 1750 rpm, open, drip-proof enclosure, automatic thermal overload protection. Frame is a 12 gage steel fully formed structure with only two weld joints and polyester powder coating Maximum Operating Temperature of the pump is 210 degrees F/ 90c OPS-20-Kit £1,155 OPS-20-Assembled £1,270
Model
OPS-50
Cleaning rate: 108 gallons per hour Shipping weight: 85 pounds Rotor holding capacity: 20 oz of contamination. Pump and Motor Features: 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts and mechanical seal. Motor is 1/3 hp USA manufactured carbonator-mount motor, 115V-60Hz-1 phase, 1750 rpm, open, drip-proof enclosure, automatic thermal overload protection. Frame is a 12 gage steel fully formed structure with only two weld joints and polyester powder coating Maximum Operating Temperature of the pump is 210 degrees F/ 90c OPS-50-Kit £1,255 OPS-50-Assembled £1,385
Model OPS-50x2
Cleaning rate: 216 gallons per hour Shipping weight: 150 pounds System holding capacity: 40 oz of contamination. Pump Features: 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts. Motor Features: 1 hp electric motor, 115/230V-60Hz-1 phase, 1750 rpm, TEFC enclosure Frame is a 12 guage steel fully formed structure with only two weld joints and polyester powder coating Maximum Operating Temperature of the pump is 210 degrees F/ 90c OPS-50x2-Kit £1,865 OPS-50x2-Assembled £1,965
Consult your local dealer for
delivery information.
|
Exclusively Distributed in the UK and EIRE by
Sunshine Maritime Limited,
68, Morley Street
LONDON SE1 7QZ
TEL/FAX: (00) (44) (0) 870 240 6275
Dieselcraft retains the right to modify and improve product specifications
Technol 403 is a premium performance, warm-weather multi-purpose diesel fuel improver which can increase fuel Cetane by 3 to 6 numbers and improve mileage up to 10%
**************************************
Technol 246 is a diesel sludge dispersant that focuses on the asphaltene dludge problems. It has been specifically formulated to remove and eliminate diesel sludge and keep the fuel system clean.